| AGGREGATES |
| • | Produced at two regional quarries |
| • | New York State approved aggregate supplier |
| • | Clean, uniform sizes |
|
BLACKTOP FACILITIES |
| • | Traditional hot mix and Superpave Mixes |
| • | New York State Department of Transportation approved |
| • | Frequent choice of State and Local agencies |
|
CALCIUM CHLORIDE AND DUST OILS |
| • | Liquid form delivered on-site |
| • | For base stabilization and dust control |
| • | Ice melting |
| • | Used for dust control on dirt roads |
| • | Variety of construction and maintenance uses |
|
CENTRAL PLANT RECYCLING |
| • | Removal of worn asphalt surfaces |
| • | Off-site rejuvenation and reapplication of removed materials |
| • | Ideal for residential applications |
|
COLD-IN-PLACE RECYCLING |
| • | Effective reuse of worn asphalt pavement |
| • | Cost effective |
| • | Single-pass, automated application |
|
COLD MIX PAVING |
| • | Weather resistant pavement |
| • | Flexible high float emulsions |
| • | Ideal for rural areas |
|
CRACKSEALING |
| • | Advanced, all-in-one application system |
| • | Deep crack and surface crack treatments |
| • | High-production, quick set |
| • | Ideal for urban applications |
|
HIGHWAY CONSTRUCTION |
| • | Road reconstruction |
| • | Excavation, earthwork, and drainage |
| • | Inter-and intrastate highways |
| |
|
LABORATORIES |
| • | State-of-the-art testing equipment |
| • | Research and Development |
| • | Quality Control |
|
METRO-MAT (QUICKSET) |
| • | High durability wearing course |
| • | Preventive maintenance |
| • | Ideal for metropolitan/residential use |
| • | Maintains curb reveal |
|
MICRO-PAVING |
| • | Durable, quick set latex-modified overlay |
| • | For high volume roadways |
| • | Skid resistant |
| • | Maintains curb reveal |
|
MODIFIED ASPHALT |
| • | Multi-grade asphalt |
| • | Polymerized asphalts (PMAC) |
| • | PGBinders |
| • | Custom blended specialty asphalts |
| • | Advanced technologies through research and development |
|
REPROFILING |
| • | Cost-effective surface reconstruction |
| • | Grinds existing surface |
| • | Re-establishes proper grade and slope |
| • | 10-foot width allows completion in 2 passes on most |
|
SURFACE TREATMENT
| | • | The low-cost maintenance process |
| • | Traditional chip seal and sand seal |
| • | Enhanced with high float emulsions |
| • | Rapid and medium set polymerized emulsions |
|
